Further High-Grade Antimony Results at NW Array
Released
Released
Announcement PDF
ASX Announcement
7th October 2025
High-Grade Antimony Results at NW Array
Support U.S.-Aligned Critical Mineral Strategy
Felix Gold Limited (ASX: FXG) reports additional high-grade antimony assay results from ongoing
drilling at the NW Array gold-antimony prospect. Results confirm down-dip extensions of surface
mineralisation and continue to demonstrate the strong grades and continuity of antimony mineralisation
at shallow depths.
Highlights:
● Additional High-Grade Results: Latest assays include 5.87m @ 4.34% Sb from 54.08m
(25TCDC019), including two very high-grade intervals up to 38% Sb. (Drill core photo in Fig. 1)
● Down-Dip Extension Confirmed: Results confirm the down-dip extension of the high-grade
structure exposed in surface trench 25NWTR005 (previously reported 15 September 2025).
● True Width Estimation: True widths of 4.2m to 5m were estimated with reasonable confidence
for the vein zone intersected in holes 25TCDC019 and 25TCDC015.
● Bulk Sample: Permit amendment to our current exploration licence has been lodged (approval
pending) to obtain a bulk sample of approximately 1,600 tonnes targeting veins containing
near pure stibnite.
● Winter Program: Drilling, bulk sampling, and ongoing environmental baseline studies will now
continue through the winter (1 month off mid-December to mid-January)
● Multi-Year Permit: Engineering, resource estimation, environmental studies, and community
outreach are ongoing, targeting early Q1 2026 for submission of permit for multi-year mining
operations.
● Drilling Program Continues: 52 RC holes (2,889.5m) and 38 diamond holes (2,719.9m)
completed to date, with drilling ongoing to extend and better define mineralisation. Antimony
assays pending for 64 drill holes; gold assays pending for 90 holes.
● Fast-Track Development Pathway: Results continue to support assessment of near-term
antimony production targeting Q4 2025 to Q1 2026*
*No feasibility study completed, production scenarios are conceptual only and subject to
completion of appropriate technical studies, feasibility work, permitting, and Board approval.
Production includes potential sale of material from bulk sampling.
Felix Gold Limited (ASX.FXG) 1
ASX Announcement
7th October 2025
Felix Gold’s Executive Director, Joe Webb, commented:
"These latest results continue to validate the exceptional quality of our antimony discovery at Treasure
Creek. Intersecting 5.87 meters at 4.34% antimony from 54 meters depth—including ultra-high-grade
intervals up to 21.83%—confirms the down-dip extension of our surface mineralization with estimated
true widths of 4 to 5 metres.
The strategic timing couldn't be more relevant. With China's export ban creating acute supply
shortages and antimony prices reaching US$60,000 per tonne, the U.S. government has issued
emergency declarations and mobilized unprecedented funding for domestic production. Our project sits
20 minutes from Fairbanks with full infrastructure access, targeting production within months, not years.
We've lodged a permit amendment for a 1,600-tonne bulk sample targeting zones that metallurgical
testing shows contain over 80% stibnite direct from the ground. Our processing flowsheet is elegantly
simple: excavate, hand sort, bag. No crushing plants, no complex metallurgy—just direct-ship
concentrate potentially exceeding military-grade specifications with very low capital expenditure.
Simultaneously, we're advancing the foundation for sustained operations—winter drilling continuing
through the season, comprehensive environmental baseline studies underway, and targeting early Q1
2026 for multi-year permit submission.
I'm personally based in the United States to ensure we capitalize on this unique convergence of
geology, geopolitics, and market dynamics. The goal is clear: demonstrate near-term production
capability, secure offtake agreements and continue building toward a longer-term strategic operation."
Photo 1 and 2 (left): Stibnite from trench 25NWTR004 reported on 13 February 2025 “High-Grade
Antimony” which assayed 58% in metallurgical results reported on the 30 May 2025 “Metallurgical Test
Work Delivers High-Grade”. Photo 3 (right): The same stibnite sample as per Photo 1 and 2 and drill
core from hole 25TCDC004 45.8 m, which assayed up to 24.9% Sb reported on 15 September 2025.
Felix Gold Limited (ASX.FXG) 2
ASX Announcement
7th October 2025
Treasure Creek Antimony Project
The Treasure Creek Project (Fig. 2) hosts significant antimony mineralisation across multiple antimony and
gold prospects, with NW Array and Scrafford representing the most advanced prospects. Antimony
mineralisation occurs primarily as stibnite (Sb₂S₃) and oxidised forms, including stibiconite and some
valentinite, hosted within vein and breccia zones in felsic porphyry and quartz-mica schist and associated
with gold mineralisation.
The project benefits from excellent infrastructure access, being located within 20 minutes of Fairbanks, with
established roads, power, and a skilled workforce. This proximity to infrastructure significantly de-risks any
future development scenarios.
Fig 2. Location of Treasure Creek with near-term antimony production focus
Assessing the Viability of Near-Term Production
With very high antimony grades exposed at surface and strong existing infrastructure, Felix is advancing a
streamlined development pathway targeting potential production commencement in Q4 2025–Q1 2026. No
feasibility study has been completed, production scenarios are conceptual only and subject to completion of
appropriate technical studies, feasibility work, permitting and Board approval.
Felix Gold Limited (ASX.FXG) 3
ASX Announcement
7th October 2025
Felix’s Strategy: Start Small, Start Fast.
● Direct access to high-grade mineralisation– up to 3m @ 50.26% Sb at surface, with a 25m
outcropping stibnite vein (open along strike and at depth) and multiple additional veins identified.
● Low-capex, modular approach – assessing the viability of simple crushing, screening, and
concentration rather than complex large-scale builds.
● Accelerated pathway – assessing the viability of small-scale surface mining to reduce geological
risk, eliminating underground development, and minimising environmental footprint.
Strategic Significance – Small-Scale Solution to a Big Supply Gap
● For U.S. supply chain security: Rapid-response production, aligned with federal priorities,
potentially addressing a meaningful portion of U.S. demand.
● For global markets: Premium positioning in a tight market, first-mover advantage
● For Felix and investors: Low capital intensity, rapid payback potential, and multiple funding
pathways*
*No feasibility study completed, production scenarios are conceptual only and subject to completion of
appropriate technical studies, feasibility work, permitting, and Board approval.
The Strategic Opportunity:
Perfect Timing Meets Perfect Geology
China's Export Ban Creates Supply Crisis
In December 2024, China formally banned antimony exports to the United States, severing America's
primary supply chain for a metal essential across multiple critical industries. With China controlling 85% of
global antimony processing and the U.S. importing 100% of its antimony needs, this represents an
unprecedented threat to American industrial supply chains.
The vulnerability in numbers:
● U.S. antimony import dependence: nearly 100%
● China + Russia control of global antimony production: +90%
● U.S. defense stockpile status: Critical shortfall (Department of War assessment)
● Time since last U.S. mining production: 30+ years
Felix Gold Limited (ASX.FXG) 4
ASX Announcement
7th October 2025
Critical Applications Drive Urgent Demand
Antimony is irreplaceable across America's key industrial sectors:
● Defense & National Security: Military munitions and defense systems, night vision systems and
infrared sensors, nuclear weapons production, advanced semiconductors (indium antimonide for
surveillance and space applications)
● Clean Energy Transition: Solar panel glass production — antimony trioxide essential for PV glass
manufacturing (fastest-growing antimony market), energy storage systems, power grid infrastructure
● Industrial & Consumer Applications: Electronics manufacturing, automotive industry components,
building materials, lead-acid batteries
● Market impact: Antimony prices have rocketed from US$11,000/tonne to over US$60,000/tonne
through 2024 to 2025 (https://www.coreconsultantsgroup.com/antimony-from-niche-metal-to-global-frenzy
May 2025, data sourced from Fast Markets), with limited substitution options creating extended
deficit conditions.
Washington Mobilizes Funding
The U.S. government response has been swift and unprecedented:
● Executive Order 14156 (January 20, 2025): "Declaring a National Energy Emergency" — Formal
emergency declaration covering energy and critical minerals with streamlined permitting and
emergency authorities
● Executive Order 14241 (March 20, 2025): "Immediate Measures to Increase American Mineral
Production" — Invokes Defense Production Act for critical minerals with 10-day deadlines for
agencies to identify priority projects for immediate approval
Federal Funding and Offtake Mechanisms including but not limited to:
● Defense Production Act Title III: Direct funding for domestic critical mineral production capabilities
● CHIPS and Science Act: US$280 billion program includes funding for antimony semiconductor
applications
● National Energy Dominance Council: Fast-track permitting for strategic mineral projects
● National Defense Stockpile: Defense Logistics Agency manages strategic reserves with antimony
identified as critical shortfall requiring replenishment
● Government Offtake Options: Multi-year purchase agreements, pre-purchase mechanisms, and
stockpile procurement similar to DoD contracts with MP Materials for rare earths
Economic reality: The US Government is investing heavily on emergency antimony stockpiling — an
approach the Department of War acknowledges as unsustainable. With nearly 100% import reliance and
antimony identified as one of the most critical materials in strategic shortfall, the federal strategy has shifted
to supporting the development of domestic supply chains.
Felix Gold Limited (ASX.FXG) 5
ASX Announcement
7th October 2025
Fig 3. NW Array drilling results showing locations of reported drill holes and selected significant intersections
previously reported.
Felix Gold Limited (ASX.FXG) 6
ASX Announcement
7th October 2025
2025 NW Array Drilling Program
Felix Gold is currently conducting an extensive program of drilling and trenching at the NW Array
gold-antimony prospect. To date a total of 52 RC holes for 2889.5 m (including 4 water monitoring bores)
and 38 diamond holes for 2719.9 m have been completed. Drilling is targeted at better defining the extents
and grade of high-grade antimony and gold mineralisation intersected in previous drilling and trenching
campaigns.
Samples from the drilling program have been submitted to MSA Laboratories in Vancouver for multi-element
analysis with specialised methods for high grade antimony (see below) and PhotonAssay for gold. Due to
the current high demand on laboratories, no gold analyses have been received for the 2025 drilling.
Figure 1. Diamond drill core from hole 25TCDC019, 54.08m - 58.5m. High-grade east-west trending vein zone,
black portions are massive stibnite veins. HQ core, diameter 6.35 cm, red labelled wooden blocks indicate sample
boundaries.
Felix Gold Limited (ASX.FXG) 7
ASX Announcement
7th October 2025
Drill results
Antimony assays were received for another four diamond core holes from the 2025 drilling program.
Significant intersections are summarised in Table 1, with drill hole details in Table 2 and full sampling details
presented in Appendix 1. Locations of intersections with respect to other drill holes and interpreted
structures are presented in plan view in Fig 3 and in cross-section perpendicular to east-west veining in Fig.
4.
The best intersection in 25TCDC019 of 5.87 m @ 4.34% Sb from 54.08 m is from a south-dipping vein zone
interpreted to be the down-dip extension of the structure exposed in trench 25NWTR005 and reported in
FXG’s previous drilling announcement on 15 September 2025. The intersection includes two very high-grade
(>10% Sb) intervals of 0.99 m and 0.47 m that correspond with wider massive stibnite veins. The same vein
zone is interpreted to have been intersected up-dip of 25TCDC019 in hole 25TCDC015 (5.26 m @ 2.42%
Sb from 17.19 m), where massive stibnite is less well developed but the host fault structure is clearly seen.
The true width of the intersections in this vein zone can be estimated with reasonable confidence at 4.2 m
and 5 m in holes 25TCDC019 and 25TCDC015 respectively from a zone striking 085° and with an average
dip of 65° south.
The remaining reported intersections in hole 25TCDC019 and the upper two intersections in hole
25TCDC021 are interpreted as other approximately east-west trending and south-dipping vein zones and
described in the 15 September 2025 announcement.
The lower intersection in hole 25TCDC021 (3.54 m @ 3.61% Sb from 44.54 m) is related to massive stibnite
fill in a zone of “black breccia” as described in the 15 September announcement. Hole 25TCDC014 was
expected to intersect this breccia zone but it is quite narrow and low-grade (2.97 m @ 0.19% Sb from 17.64
m) in this position. A similar low-grade narrow breccia intersection was noted in hole 25TCDC009 (see cross
section figure for location). Further work and results are needed to be able to better understand the controls
on the distribution, thickness and grade of the breccia unit.
Antimony Mineralisation
Drilling and trenching at NW Array has revealed two main styles of antimony mineralisation:
1. Individual veins or close spaced zones of veining, fracturing and brecciation with quartz and coarse
stibnite fill
2. Breccia zones with dominantly angular clasts of silicified wallrock and quartz veining where stibnite
is present as fine-grained disseminations in breccia matrix and coarser, patchy breccia fill.
Fine-grained siliceous alteration and disseminated stibnite produces a characteristic black colour
and places and these zones are referred to as “black breccia”.
Breccias are interpreted to be related to faulting and are highly variable in width and antimony content. Felix
geologists are currently refining the geological model, which includes late northwest-trending faulting
offsetting both vein and breccia style mineralisation zones. The current understanding is that breccia zones
dip on average 50° towards the southeast to east and veins dip about 60°-70° towards the south to
south-southwest.
Felix Gold Limited (ASX.FXG) 8
ASX Announcement
7th October 2025
A simplified interpretation of the distribution of the two different styles of mineralisation is provided in plan
view in Fig 3. Widths of east-west trending veins may not be accurate as in many cases they are interpreted
from RC assays with a minimum sample length of 1.5 m. Offsetting NW trending faults, such as the one
exposed in recent trench 25NWTR005, are likely responsible for some of the apparent variation in strike of
veins. Further work including surface trenching is planned to better define the width and strike extent of
these zones.
Antimony analysis
Standard analysis by four-acid digest followed by ICP-MS has an upper detection limit of 10,000 ppm (1%)
Sb and over-limit samples must be re-analysed by one of two different methods depending on the expected
grade:
1. Sodium peroxide fusion followed by ICP-MS, with an upper detection limit of 0.05%-10% Sb
2. Titration using cerium sulphate with an upper detection limit of 100% Sb
Four-acid ICP does not always record an over-limit result for antimony >1% due to volatile loss and
formation of insoluble precipitates in acid digested samples. To correctly analyse higher grades, samples
were initially indicated as high-grade on sample submission sheets through visual estimates or portable XRF
results. After earlier results from sample batches, a 3000 ppm (0.3%) limit on 4A-ICP is now being applied
as an indicator to analyse by peroxide fusion. From studying all results to date it is apparent that this limit
may need to be reduced further to ensure accurate determination of antimony content.
Further work
The drill program at NW Array is ongoing, targeted at extending and better defining the grade, thickness and
geometry of zones of mineralisation. Shallow trenching over the expected surface position of the breccia
zone and east-trending vein zones is currently being planned. More assay results are anticipated in the
coming weeks and will be released when they are available.
Felix Gold Limited (ASX.FXG) 9
ASX Announcement
7th October 2025
Fig 4. Cross Section A-B showing reported intersections and previously reported results. Section width +-
12.5 m, orientated roughly perpendicular to strike of vein zones and almost parallel to the breccia zone.
Breccia zone is dipping out of plane of section towards viewer, many holes are drilled at an angle to the
strike of the section. Some intersections do not align with zones on section due to distance from section
plane and obliquity of zone strike.
Felix Gold Limited (ASX.FXG) 10
ASX Announcement
7th October 2025
Table 1: Significant Antimony Intercepts (>0.2% Sb cut-off):
Hole ID From (m) To (m) Interval (m) True Width Sb_pct As_ppm
25TCDC019 54.08 59.95 5.87 4.2 4.34 1373
incl 54.8 55.79 0.99 13.71 880
incl 57.55 58.02 0.47 21.83 1073
25TCDC019 and 16.2 16.61 0.41 6.51 610
25TCDC019 and 36.88 41.7 4.82 0.26 1705
25TCDC015 17.19 22.45 5.26 5.0 2.42 951
25TCDC021 21.13 24.17 3.04 2.93 591
25TCDC021 and 30.7 31.43 0.73 1.17 626
25TCDC021 and 44.54 48.08 3.54 3.61 1972
25TCDC014 17.64 20.61 2.97 0.19 195
Table 2: Hole Locations Treasure Creek Tenement, NW Array Target Area
HoleID Hole Type
UTM_NAD83_Zone 06N
EOH (m)
Azimuth
(m)
Dip (m)
East North RL (m)
25TCDC014 DC 461769.92 7209024.004 453.108 60.96 328.7 -47.1
25TCDC015 DC 461747.8 7208930.929 457.138 67.06 341.4 -48.8
25TCDC019 DC 461731.72 7208891.821 457.985 77.42 14.5 -44.9
25TCDC021 DC 461782.29 7208959.219 448.801 87.42 325.4 -45.1
This ASX release was approved for release by the Board.
ENDS
Enquiries
Joseph Webb Reach Markets
Executive Director Investor and Media Relations
Felix Gold Limited Ph: 1300 805 795
Ph: +61 422 955 411 E: ir@reachmarkets.com.au
E: joe.webb@felixgold.com.au
Felix Gold Limited (ASX.FXG) 11
ASX Announcement
7th October 2025
About Felix Gold
Felix Gold Limited (ASX: FXG) is an ASX-listed gold and critical minerals discovery business operating in
the highly endowed Tintina Gold Province of Alaska in the United States.
Our flagship asset is a substantial landholding in the world-class Fairbanks Gold District, where historical
gold production exceeds 16 Moz and historical antimony production shows grades up to 58% Sb from the
Scrafford Mine at Treasure Creek, Alaska's second-largest historical antimony producer. In Fairbanks, our
tenements sit within one of the largest gold production centres in the entire Tintina belt and lie in close
proximity to both Kinross Gold’s Tier 1 gold mine, Fort Knox, and the rapidly growing Freegold Ventures’
discovery, Golden Summit.
Felix’s key projects are located only 20 minutes from our operational base in the central mining services hub
of Fairbanks City, Alaska. This base is a huge advantage for Felix with its existing infrastructure, low-cost
power, skilled workforce and long history of gold and antimony production. It allows us to explore year-round
and delivers genuine potential development pathways for our assets.
Felix’s value proposition is simple: we are striving to be the premier gold and critical minerals exploration
business in the Tintina Province through the aggressive pursuit and realisation of Tier 1 gold discoveries.
Visit the Felix Gold website for more information.
Competent Person Statements
The information in this report that relates to Exploration Results is based on information compiled by Dr
James Lally, a Competent Person who is a Member of The Australian Institute of Geoscientists. Dr Lally is
an independent consultant to Felix Gold Limited and is a shareholder in the Company. Dr Lally has sufficient
experience which is relevant to the style of mineralization and type of deposit under consideration and to the
activity which is being undertaken to qualify as a Competent Person as defined in the 2012 Edition of the
‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves.’ Dr Lally
consents to the inclusion in this report of the matters based on his information in the form and context in
which it appears.
Forward-Looking Statements
Various statements in this release constitute statements relating to intentions, future acts and events. Such
statements are generally classified as “forward-looking statements” and involve known and unknown risks,
uncertainties and other important factors that could cause those future acts, events and circumstances to
differ materially from what is presented or implicitly portrayed herein. Words such as “anticipates”, “expects”,
“intends”, “plans”, “believes”, “seeks”, “estimates” and similar expressions are intended to identify
forward-looking statements. Felix cautions shareholders and prospective shareholders not to place undue
reliance on these forward-looking statements and references to what events have transpired for other
entities, which reflect the view of Felix only as of the date of this release. The forward-looking statements
made in this release relate only to events as of the date on which the statements are made. Various
statements in this release may also be based on the circumstances of other entities. Felix gives no
Felix Gold Limited (ASX.FXG) 12
ASX Announcement
7th October 2025
assurance that the anticipated results, performance or achievements expressed or implied in those
statements will be achieved. This release details some important factors and risks that could cause the
actual results to differ from the forward-looking statements and circumstances of other entities in this
release.
Previous Disclosure – 2012 JORC Code
The information in this release that relates to Exploration Results, Mineral Resources and Exploration
Targets for Felix’s Fairbanks Gold Projects was extracted from the following ASX Announcements:
15 Sept 2025 FXG: High Grade Antimony Drill Intersections and Project Update
11 June 2025 FXG: Drilling/Studies Underway at High-Grade Antimony Project
29 May 2025 FXG: High-Grade Antimony Concentrate Results from Met Test Work
12 Feb 2025 FXG: High-Grade Antimony True Width of 3m at 50.26%
23 Jan 2025 FXG: High-grade Antimony and Gold Results from Trenching
28 Aug 2024 FXG: High Grade Antimony Assay Results up to 15.99% Sb
20 Jun 2024 FXG: Maiden NW Array Inferred Mineral Resource
19 Oct 2023 FXG: High Grade Antimony Assays up to 28% Sb
17 Jul 2023 FXG: High-Grade Critical Mineral Discovery at NW Array
09 Dec 2022 FXG: Scrafford Shear Potential Grows and High-Grade Antimony Initiatives Commenced
28 Jan 2022 FXG: Felix Gold Prospectus
A copy of such announcements is available to view on the Felix Gold Limited website
felixgold.investorportal.com.au. These previous reports were issued in accordance with the 2012
Edition of the JORC Code. The Company confirms that it is not aware of any new information or data that
materially affects the information included in the original market announcements. The Company confirms
that the form and context in which the Competent Person's findings are presented have not been materially
modified from the original market announcement.
Felix Gold Limited (ASX.FXG) 13
ASX Announcement
7th October 2025
JORC REPORTING TABLES
Section 1: Sampling Techniques and Data
Criteria Explanation Commentary
Sampling
techniques
● Nature and quality of sampling
(eg cut channels, random chips,
or specific specialised industry
standard measurement tools
appropriate to the minerals under
investigation, such as downhole
gamma sondes, or handheld XRF
instruments, etc.). These
examples should not be taken as
limiting the broad meaning of
sampling.
● Include reference to measures
taken to ensure sample
representivity and the
appropriate calibration of any
measurement tools or systems
used.
● Aspects of the determination of
mineralisation that are Material to
the Public Report. In cases
where ‘industry standard’ work
has been done this would be
relatively simple (eg ‘reverse
circulation drilling was used to
obtain 1 m samples from which 3
kg was pulverised to produce a
30 g charge for fire assay’). In
other cases more explanation
may be required, such as where
there is coarse gold that has
inherent sampling problems.
● Unusual commodities or
mineralisation types (eg
submarine nodules) may warrant
disclosure of detailed information.
● Reverse Circulation drilling was sampled on
1.52 m (5 feet) intervals from which 2-3kg
was split and pulverised / crushed to
produce samples for ICP multi-element
analysis, high grade Sb analysis and gold
analysis by PhotonAssay™
● Diamond drill core was sampled over
downhole lengths between 0.3m and 2.5m
(average 1m) to produce samples for ICP
multi-element analysis, high grade Sb
analysis and gold analysis by
PhotonAssay™ . Diamond drill-core sample
intervals were based on changes in geology.
Drilling
techniques
● Drill type (eg core, reverse
circulation, open-hole hammer,
rotary air blast, auger, Bangka,
sonic, etc) and details (eg core
diameter, triple or standard tube,
depth of diamond tails, face-
sampling bit or other type,
whether core is oriented and if
so, by what method, etc).
● Reverse Circulation (RC) holes were
drilled with a 76mm (3 inch)
face-sampling hammer with 73mm (2.875
inch) drill rods and 102mm (4 inch)
casing.
● Diamond holes were wireline HQ (63.5mm
diameter) holes.
● The diamond drill program reported here
was undertaken by C-n-C Drilling LLC
utilizing CS 14 skid mounted drill.
Felix Gold Limited (ASX.FXG) 14
ASX Announcement
7th October 2025
Criteria Explanation Commentary
● Core was oriented wherever possible for
collection of structural data using a Reflex
ACTIII
● The core was reconstructed into continuous
runs on a cradle for orientation marking
before it was laid in the box at the drill.
Drill sample
recovery
● Method of recording and
assessing core and chip sample
recoveries and results assessed.
● Measures taken to
maximise sample recovery
and ensure representative
nature of the samples.
● Whether a relationship exists
between sample recovery and
grade and whether sample bias
may have occurred due to
preferential loss/gain of
fine/coarse material.
● RC samples were visually assessed for
recovery and were considered
representative of bedrock intersected.
● Visual inspection of samples estimated no
significant loss of sample from each 1.52m
interval.
● No relationship between sample recovery
and reported analyses has been
established.
● Diamond core recovery was determined by
measuring the total length of core in the
barrel over the run length.
● Hole depths were checked against the
drillers core blocks at the time of processing.
Inconsistencies between the logging and the
driller’s depth measurement blocks were
investigated.
● Diamond core samples are considered dry.
The recovery and condition are recorded
between every core block. Generally,
recovery is 98-100% but on very rare
occasions in weathered material or very
broken material, recovery was down to 50%.
● For Diamond drilling, contractors adjust the
rate of drilling and method of recovery
issues arise
● No significant sample loss or bias has been
noticed
Logging ● Whether core and chip samples
have been geologically and
geotechnically logged to a level
of detail to support appropriate
Mineral Resource estimation,
mining studies and metallurgical
studies.
● Whether logging is qualitative or
quantitative in nature. Core (or
costean, channel, etc)
photography.
● The total length and percentage
of the relevant intersections
logged.
● RC chips and diamond core were
qualitatitvely logged for lithology and
alteration with semi-quantiative logs for
oxide and sulphide mineralisation.
● RC and diamond holes were logged in for
their entire lengths.
● Logging detail is sufficient to support
geological modelling and mineral
resource estimation.
● Representative RC chip samples from each
1.52m interval were placed in chip trays and
photographed.
● All drill core was photographed wet using a
digital camera and stored on the site server.
Felix Gold Limited (ASX.FXG) 15
ASX Announcement
7th October 2025
Criteria Explanation Commentary
● Core logging included RQD and
geotechnical measurements. Structural
measurements of veins, fractures and
foliation were taken from core using a strip
protractor.
Sub-sampling
techniques and
sample
preparation
● If core, whether cut or sawn
and whether quarter, half or all
core taken.
● If non-core, whether riffled,
tube sampled, rotary split, etc
and whether sampled wet or
dry.
● For all sample types, the
nature, quality and
appropriateness of the sample
preparation technique.
● Quality control procedures
adopted for all sub-sampling
stages to maximise
representivity of samples.
● Measures taken to ensure that
the sampling is representative
of the in situ material
collected, including for
instance results for field
duplicate/second-half
sampling.
● Whether sample sizes are
appropriate to the grain size of
the material being sampled.
● RC intervals were sub-sampled using a
3-tier dry sample splitter attached to the drill
rig cyclone. Two samples were taken from
each 1.52m interval, collecting ~12.5% each
of the total sample, rangi
Share your feedback
Discover